Description
Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.
The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting
tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of
substantial inundation of water.
Product Details
Product Support
Manuals:
OPERATING MANUAL FLOOD SENSOR FGFS-101 v2.1 – v2.3
Videos / YouTube:Flood Sensor
Technical Specifications
|
Product Name
|
Flood Sensor
|
|
Battery Type
|
CR123A
|
|
Operation Range
|
30m
|
|
Power
|
12 – 24 VDC (optional)
|
|
Radio frequency
|
921.42 MHz (AU/NZ Z-Wave)
|
|
Power Consumption
|
0,4W
|
|
Operation temperature
|
0 – 40C*
|
| Measured temperature range | -20 to 100C |
|
Temperature measuring accuracy
|
0,5 C
|
|
Housing
|
ABS
|
|
Size (Diameter x Height)
|
72 x 28 mm
|
Reviews
There are no reviews yet.